Fridge Freezer Alarm | Email, Phone Alert

SMART FREEZER MONITORING

I can monitor and alarm 4 freezers with one TV2

I get a phone alert if any one of them becomes unsafe.

Once you enter in your safe zone for each freezer the TV2 checks every four seconds to see if the temperature has become unsafe.

An alarm delay is usually set to eliminate false alarms caused by the door being opened or warm product loaded into the freezer.

So if the temperature gets too warm for too long, or the power fails, the freezer alarm goes into alarm mode and you are alerted.

The TV2 alarm can send alerts via emails to several people and phone calls to adittional people and phone calls to additional people.

Buy Now

CONTINUOUS PROTECTION

Intelligent Alarm Monitoring

It is all too easy for a freezer to malfunction by warming up and then cooling down while no one is around. This sometimes happens when the compressor relay gets stuck. Should that happen, it would not be noticed if the temperature was being recorded once or twice a day, but the TV2 will catch it every time.

With the TV2 Freezer Alarm you immediately know if the temperature became unsafe when no one was around.

The freezer temperature history is one-touch away, so one glance tells you all you need to know about what happened last night, last month or even last year.

APPLICATIONS

Protects Vaccines, Tissue, Food & Inventory

The TV2 Freezer Alarm is used in health clinics, pediatricians offices, labs, hospitals, manufacturing plants, and even commercial kitchens to alarm and document freezer and refrigerator temperatures.

You can view a temperature chart on the TV2 Freezer Alarm. The chart is so easy to understand that each member of your staff will "get" it without any special training.

They automatically become part of your quality control system every time they glance at the display. Anyone can immediately see if everything is OK or if something happened while no one was looking.

If all the numbers are green everything is OK. If a number is red there is a problem.

Vaccines

Tissue

Food

Inventory

QUICKCHECK DISPLAY

Monitor Your Freezers At A Glance

One glance at the display shows that freezer number 4 is too warm. Once it cools down the -5.0° temperature will turn green.

To see how long it has been unsafe, touch the -5.0° reading and the screen will change to show a temperature history chart.

Simply touch the temperature reading to instantly view the complete temperature history chart.

COMPATIBLE EQUIPMENT

The TV2 Freezer Alarm Works With Any Freezer or Fridge/Freezer

The TV2 Freezer Alarm can be used with a wide range of refrigerators and freezers, making it suitable for healthcare facilities, laboratories, commercial kitchens, and medical storage environments.

Refrigerator & Thermaviewer

Under Counter Refrigerator with Vaccines

Blood Bank Refrigerator

COMPLIANCE & RELIABILITY

Built For Auditors, Regulators & Professionals

The TV2 Freezer Alarm complies with all CDC, JCAHO and CAP requirements. It displays and prints charts or temperature lists for regulators or auditors as proof that your inventory has been properly stored and maintained.

21 CFR 11

Logged data is encrypted and can be electronically signed.

128-bit Encryption

Downloaded files remain protected in TV2 format.

Calibration

Three-point calibration table with optional NIST certificate.

Battery Backup

Continues monitoring during power failures for up to 100 hours.

No Hidden Costs

There are no monthly fees. The TV2 operates as a completely standalone system without requiring a computer, paper charts, pens or ongoing maintenance.

SIMPLE INSTALLATION

Ready To Monitor In Just A Few Minutes

The TV2 freezer alarm is simple to install and use. Begin by placing each sensor into the freezer you want to monitor. The sensor can be positioned in the freezer or placed in a bottle of glycol. The sensors are fully immersible.

After positioning the sensors, supply power to the display. The Setup menu will appear so you can set the date, time and sample interval.

The TV2 Freezer Alarm immediately begins to collect, log and chart temperatures. Lastly, set your alarm parameters and your system is ready to monitor.

Watch Installation Video View Slide Show

FEATURES & SPECIFICATIONS

TV2 Freezer Alarm Features & Specifications

Technical specifications and performance details for the TV2 Refrigerator-Freezer Alarm System.

Number of Sensors	Up to four wired sensors with each display or Up to four wireless sensors with each display
Temperature Range	Thermistor Sensor: -20°C to 80°C (±0.3°C) Wired Digital Sensor: -40°C to 80°C (±0.3°C) Thermocouple Sensor: -200°C to 1250°C (Accuracy depends on thermocouple type)
Sensor (Liquid)	3" Stainless Steel Thermocouple or 2" Digital Sensor (Submersible) (Complete specifications)
Display Screen	Easy-Touch™ (Full Color)
Display Unit Size	8 3/8" × 5" × 1"
LCD Display Size	5" Diagonal
Alerts	Internal buzzer and flashing screen. Optional auto-dialer or email alert.
Log Interval	Variable: Once a minute to once every twenty-four hours.
Display Resolution	0.1° on LCD, 0.0001 on PC
Calibration	3-point table for each sensor with optional NIST traceable certificate.
Storage Technique	Non-volatile memory stores more than 80,000 samples for each sensor.
Power	Via USB cable from a PC or 12VDC, 50/60Hz (120–240V wall adaptor)
Battery Backup	1100mAh lithium battery operates the system for at least 100 hours.
Download to PC	USB cable/wifi or optional wired Ethernet connection.
Indicators	LCD & LED
User Settings	Onboard password-protected menu system.
Alarm Conditions	Power failure plus high & low for each sensor.
Shipping Weight	2 lbs with power adaptor, sensors & cables.

Refrigerator Freezer Alarm