Download Data with a USB Cable
You can unplug the USB cable from the power cube and plug it into any USB port on a computer to download data.
If TView does not see the TV2, copy these Drivers for TV2 to your computer, unzip them and install them.For firmware with number beginning with 9 or 8.
For firmware with number beginning with 3, 4, 5, 6 and 7.1x.1-18.
For firmware with number beginning with 7.1x.1-19.
You can unplug the USB cable from the power cube and plug it into any USB port on a computer to download data.
If TView does not see the TV2, copy these Drivers for TV2 to your computer, unzip them and install them.If the TV2 has a wired Ethernet connection it can be accessed over the LAN or WAN. It will have a unique MAC address and will be assigned an IP address when you plug an Ethernet cable into the TV2 and an Ethernet hub or switch. See the TV2 users guide for more information.
To access the TV2 over the Internet (outside your local area network) you must use port forwarding for your router. Once the port is forwarded for a TV2 the QuickCheck screen can be viewed with any browser and logged data can be downloaded using the TView software.
To download data from the ThermaViewer 1, in addition to the software above, you will need the cable that came with your monitor. It is a ten foot cable with a DB9 connector and a stereo plug.
To access a ThermaViewer 1 over a LAN or a WAN you must use a protocol converter, such as the Lava Link serial to IP converter, which will establish a virtual com port on your PC. The disc which came with the Lava Link device must be installed on each computer which will access the ThermaViewer, to create a virtual com port on that PC, which will redirect the IP address.
The TView program will download data and display the chart on the computer screen. However, if you save the data it will be saved in a US format (i.e. the separators between numbers will be a 'period' for a decimal point and a 'comma' between the 1000's). To load the saved chart into Excel and convert it so that the European style separators are shown, you must 'import a file' under the Excel 'Data Menu' and change the separators.
Get a custom quote for your facility's monitoring requirements. Our technicians are ready to assist with sensor configuration, installation, and ongoing support.